Essential Options for the Load Boards Now

Knowing how to read the diagram or load chart of a truck or self-propelled crane is of vital importance, especially when working with heavy loads and maneuvers at high altitude that can be a risk. Therefore, to ensure the welfare of the staff and ensure that your projects are completed successfully, it will be essential to consult this table, which must be done before renting or using a crane. But remember that you should not consult any diagram, since each crane has a specific load table where you can read its capabilities and how it varies considering the distance and angle of the machine.

As we said before, the load tables of similar cranes but from different manufacturers have their differences, which can influence the failure of a maneuver or the overturning of the machinery. For this reason, it is important that the load graph of the crane, in addition to being well understood, is from its own manufacturer. Since the load tables are specific to a certain brand, model and configuration of a piece of equipment. With the support of the best load board in United States this is important.

What it means is that, whether you’re working with a crane truck from brands like Terex, Nacional, Manitex, Pioneer or Altec, or an all-terrain crane, such as Grove, Link-Belt, Manitowoc, Kato or Tadano, that although they look alike, they are different. So you already know how to use the manufacturer’s load table.

Also, do not forget to take into account the buckets, extensions, load blocks, lifting cables and other accessories that can alter the lifting capacity of the crane or the equipment used to carry out the survey. For example, the weights of hooks, blocks, buckets, slings and other handling devices must be added to the load or deducted from the lifting capacity of the equipment.

Know weight and distance of load

Before you start reading the loading diagram, you must know the weight of the merchandise and the distance to which it will be lifted. This distance is known as the loading radius, since the measure taken into account goes from the center of the crane’s revolving base. One thing to keep in mind is that if you are measuring from the front of the crane as you usually do, sometimes, be sure to add the distance to the center of the rotating base.

If the load is raised from a point that is above ground level, it will also be important to know the height at which it will be lifted to ensure that the boom reaches a height high enough to be above the load and yet thus ensure a safe lift. Remember that the closer a crane is to the load and the greater the angle of the boom, the greater the lifting capacity.


Comments are closed.