Archive for the ‘Electronic’ Category

Fine Viewports for you Now In Viewports

One of the sectors in means of transport where the technological advance has been more accelerated is the manufacture of motorcycles. In addition to a great improvement in the power and mechanical behavior, the bikes include new materials that make the products used in repair are at the same level of vanguard and quality that are incorporated in the factory.

The Company Range

The company’s range of fasteners and products for assembly and mechanical sealing is well proven in the most powerful vehicles and subjected to the toughest conditions. Fixators of high resistance and fast curing, silicones for sealing all types of lids and housings, and lubricants of extreme thermal resistance to avoid the seizing of components that are at high temperatures, are good examples of the effectiveness of The company in the assembly Mechanical of the current motorcycles. In addition, for the repair of plastic and fiber exterior parts, our company 3090 instant adhesive or the range provide a plus of excellence. From Mpf viewports this happens to be a very important matter now.

In short, the company products provide the professional with a perfect option to repair all types of parts with a quality identical to that of origin, with a minimum consumption of material and labor, thus generating high-value jobs that will generate important benefits to the workshop, in addition to a high satisfaction for the client.

  • Products and specific applications in motorcycle repair
  • The company 243 – Fixer resistance medium oiled parts

Medium strength fasteners fixer

Suitable for threads up to M36, it is used to avoid self-loosening due to vibrations in all types of threads as in the seat and shock absorber studs. It is also used in the anchor bolts of the rear fender and the front wheel axle. It supports up to 180ºC and all types of automotive fluids.

Joint maker is for use in the sealing of rigid flanges and with very good mechanization. It is the best option to seal transmissions, engine blocks or rigid covers such as the water pump or the thermostat. Fast curing is a high resistance and compatible with all engine fluids, supports up to 150ºC.

Innovative instant is two-component gel adhesive that fills gaps up to 5 mm and does not hang up. It is not only used to join small multi-substrate pieces (plastics, metal, rubber or fiber) but also used to repair and fill. It is ideal to repair fairings or to adhere rubber o-rings.

It is together with The Company the other cold plastic welding variant that we offer for motorcycle repair. Its longer application time allows the repair of major damages than with The Company and also The company is sandable, machinable, paintable and can be shallow easily.
Lasit laser engraving machine are widely used in industrial applications to mark any material and especially metal. For further details about laser marking and engraving, please visit https://www.lasitlaser.com/laser-marking-cutting-tools/

Best Options for the Perfect Electrical Services Now Possible Now

An irreplaceable component of each house is the power grid. And it does not matter at all whether an apartment building or an office space, without an electrical network, is difficult to imagine a comfortable existence. Initially, during the repair work, it is necessary to give proper value to the electrical wiring, which consists of a flap, wiring, sockets, switches, lamps and electrical appliances.

This article details the tips and rules and the procedure for electrical work, which will help you to understand how to properly install the lighting system, emergency lighting system, if necessary, the installation of a guarantee system for electricity. A reliable electrician in Singapore is perfect for this task.

Stages of electrical installation works

  • Before proceeding with electrical installation work, it is necessary to create a wiring diagram.
  • The scheme will serve as a budget for the owners, from which it will be clear how many materials, and in what quantities should be purchased.
  • The process of installing electrical wiring should be approached with great responsibility, because this area in the overall repair of the apartment is the most important. The process of electrical work includes several stages.
  • This type has a conventional electrical panel. Includes a protective automatics, which is set individually for each group

Markup

Markup must be carried out immediately before re-planning and dismantling.

How marking is done:

  • Marking places where lighting devices and other equipment will be installed;
  • Marking of the area where the wiring will be placed;
  • Pipes are laid;
  • insulators, switches, plug-in sockets are installed;
  • gaskets and fixing of wiring;
  • Separating equipment, electric receivers, distribution cabinets are installed;
  • wires are attached;
  • The final step is testing and testing.

There is special equipment that checks the quality of the contact connection; the device measures the current and voltage level.

Installation

Installation work is carried out after the completion of the ceiling and the walls of the building. They mean by themselves:

  • Sockets are initially installed;
  • after the clarification devices;
  • The power user is installed at the end.

What you need to do to perform electrical work

The wiring process consists of:

  1. dismantling;
  2. Layout;
  3. mechanical work;
  4. cable glands;
  5. Wiring harness;
  6. Installation of electrical installation equipment (switches, sockets, lamps);
  7. fixing the cables in one system;
  8. Adjustment work.

Important! The entire process of conducting electrical installation works must be under the control of a professional.

How to properly dismantle?

This process involves the removal of an obsolete outlet, switch, and wires.

Important! When dismantling, it is mandatory to turn off the power on the switchboard, in order to prevent electric shock.

How is the markup done?

It is necessary to apply the marking according to the project. On the surface of the building, it is necessary to designate lines where cables, wires, sockets, switch, lamps will be laid. Now it is considered a trend to install an outlet on an average of 40 cm, a switch at a level of 80 cm from the floor covering, but in the kitchen the outlet needs to be installed 10 cm above the kitchen countertop. A famous electrician in Singapore is perfect now.

 

Search
Archives

You are currently browsing the archives for the Electronic category.